Need laser equipment advice? Our team is ready to help. Get a Free Quote

xTool S1 Buyer's Log: 10W vs 40W vs 1064nm IR — And the £700 Lesson From a Cheap Laser Cutter

Buy the 40W xTool S1 if your work is wood, leather, and dark acrylic. Buy the 10W only if you're doing thin materials and fine detail. Do not buy the 1064nm infrared module expecting to cut metal — it's a marking and engraving tool, not a metal cutter.

That's the short version. The long version cost me about £700 on a machine that looked like a bargain, and another $850 on a module I ordered for the wrong job. I'll save you the tuition if you keep reading.

Quick definition for the search-traffic crowd: a laser cutter is a CNC machine that moves a focused beam over material to burn, melt, or vaporize it. That's the whole trick. The variables are wavelength (diode vs CO₂ vs infrared), power, speed, and how seriously you take ventilation. If you already know this, skip the next paragraph.

I run a small-batch production shop that handles laser engraving and cutting orders — mostly wood, acrylic, leather, and the occasional anodized aluminum run. Over six years I've personally bought and regretted four laser machines, totaling roughly $4,800 in wasted budget when you count the accessory graveyard in the corner. Now I keep a one-page pre-purchase checklist that has stopped at least nine bad buys. This article is the checklist in long form.

What the three xTool S1 modules actually do

The xTool S1 is a diode laser platform with swappable modules. That modularity is the selling point — but it also means the wrong module choice is an expensive mistake you can't blame on the machine.

The xTool S1 10 watt module is for fine detail. Thin basswood, leather, paper, dark acrylic, slate coasters. It engraves beautifully and cuts slowly. On 3mm plywood expect multiple passes. If your income comes from detail work — jewelry inserts, personalized gifts, small signage — the 10W is genuinely enough. If you're trying to run production cutting, you'll hate it by week two. I did.

The 40W module is the workhorse. It cuts about 10–15mm acrylic and up to 18mm softwood with multiple passes, depending on settings and material quality. It engraves faster than the 10W and handles the same detail work with a slightly wider kerf. This is the module I'd buy first for a business. Not because it's the most powerful — because it's the least limiting.

The xTool S1 1064nm infrared laser module is where people get confused. It's designed for marking bare metal — stainless steel, aluminum, brass — and certain plastics. It will not cut 3mm aluminum sheet. It will not replace a fiber laser. It marks. It engraves. It does beautiful work on metal business cards, tool tags, and coated tumblers. But if you bought it to cut metal, you bought the wrong wavelength. I know because I did. A $700 module, a $450 customer refund, and a very quiet drive home.

One more thing nobody tells you upfront: the 1064nm module has a smaller work area than the standard modules. Not a dealbreaker, but it changes your nesting strategy. Check the specs before you promise a customer a full-sheet metal run.

Why cheap laser cutters cost me more

In 2019 I bought a “40W” laser cutter for £500. The quotes said 40W. The listing said 40W. The actual optical output, measured with a power meter a month later, was closer to 5W. Cutting 3mm plywood took eight passes. The edges looked like they'd been chewed by a badger.

Did I return it? No. Shipping back to the seller cost more than the machine. I ate the loss and kept using it for small engraving jobs while I saved for something real. The £500 machine ended up costing about £1,100 once I added replacement lenses, a better air assist, and the material I burned through while learning its actual limits.

Here's the part that annoys me about the cheap laser cutter conversation: the sticker price is rarely the real price. Extraction, focus lens replacements, a proper honeycomb bed, air assist, and the material you waste while learning — those aren't optional costs. They're the cost of ownership. A £300 machine becomes a £700 machine once you make it usable. A £1,800 xTool S1 stays roughly £1,800 because it arrives with the accessories you actually need to run a job. Not all of them. But most.

When I quote a job now, I list every line: material, machine time, finishing, and a line for “figuring it out.” The customers who see the full picture rarely ghost. The ones who only want the lowest number were never going to be profitable anyway. Same logic applies to buying the machine.

Buying a laser etching machine in the UK

If you're searching for a laser etching machine UK buyers can actually use, the machine is half the budget. The other half is import VAT, a proper extractor, and a spare lens or two.

UK voltage isn't the issue — most modern diode lasers are 100–240V. The plug is. Check what ships in the box. An adapter works, but a proper UK power cable costs £8 and saves you a week of low-grade anxiety every time you switch it on.

The bigger hit is import. Buying direct from the US or China means 20% VAT plus duty plus a handling fee, and the courier will not be shy about collecting it before delivery. I quoted a Manchester client £1,650 for a 10W kit last spring without running the import numbers first. By the time it landed, the margin was gone. That was a £400 lesson in reading the full cost breakdown before opening my mouth.

Extraction is the other cost nobody budgets for. You need to vent outside or run a proper filtration unit. Acrylic and leather fumes are not something you “get used to.” They're something you extract. A decent inline fan and ducting runs £80–£150. A filtration unit runs £300–£600 if you can't vent outside. Budget for it before you buy the machine, not after.

When the S1 is the wrong tool

If you're cutting thick metal, the S1 is not your machine. Neither is any diode laser. You need a fiber laser or a CO₂ laser with the right setup, and a completely different safety conversation. I'm not going to pretend otherwise.

If you're doing one-off craft projects and don't care about speed, a cheaper machine might genuinely be fine. Not everyone needs modularity. Not everyone needs the accessory ecosystem. A hobbyist making 20 coasters a month doesn't need a 40W production module.

My experience is based on roughly 200 production orders and four machine purchases — mostly xTool S1 variants and two cheap machines I'd rather forget. I haven't tested every UK-market laser, and I can't speak to how these numbers hold up for industrial-scale operations. If you're running a factory floor, your calculus is different.

One last thing: no laser is safe without proper ventilation and eye protection. That's not a brand limitation — it's physics. The S1 ships with an enclosure option for a reason. Use it.

This pricing and availability info was accurate as of January 2025. Laser pricing moves fast — especially with import fees and bundle changes. Verify current rates before you budget. The modules are worth the money when you buy the right one. The wrong one is just an expensive lesson.

author-avatar
Jane Smith

I’m Jane Smith, a senior content writer with over 15 years of experience in the packaging and printing industry. I specialize in writing about the latest trends, technologies, and best practices in packaging design, sustainability, and printing techniques. My goal is to help businesses understand complex printing processes and design solutions that enhance both product packaging and brand visibility.

Leave a Reply